552 User Guide
552 Declaration of Conformity
552 Firmware
v1.4
Released: November 03, 2011
-
New
- Save and load user settings to internal memory
-
Fixed
- Improved transport control preventing semi-lockup conditions with some SD cards.
-
Known Issues
- SD cards 64 GB and larger are not supported.
- Intermittent issue with feeding AES/EBU from the 552 to some Sony cameras (e.g. F5, F55) where the camera will occasionally report "Input AES/EBU is not Pro Use". Workaround: Reboot the 552 or toggle the 552 sample rate from 48kHz to 96kHz and back again.
v1.2
Released: January 09, 2011
-
New
- Input Mute from Mix. Using the front panel shortcut HP press + Input PFL an input can be removed from the Master Output bus. The input still appears at its direct output and if selected as an option for AES output.
-
Changed
- Input PFL now indicated with a flashing yellow input LED. Original indication was solid yellow.
- In the absence of a time code signal, timecode & speed related metadata is not written. This is to prevent Final Cut Pro from introducing unintended sound file speed changes. The 552 continues to write the time-of-day value as a start time code stamp in bEXT when time code is absent.
v1.1
Released: January 05, 2010
-
New
- Split ear return metering
- Record timecode-to-track feature
- Auto record feature - on timecode advance
- Record-pause feature
- Take counter reset hot key. (PFL5 + Stop + Battery Check) Stop Mode Only
- Polarity reverse hot key sequence timeout so the user can execute function with one hand
- Slate mic to output on digital outputs if they are enabled.
- Time remaining on card announcements starting at 15 minutes
-
Changed
- Slate mic is now available during file playback
- File/folder navigation; press play on a folder now plays the first file in folder
- Record time remaining notice is now available while recording
- Tone is deactivated when entering the Setup Menu and other menus using SVEN
- Meter ballistics (VU + Peak) added
- Default metering now VU + Peak Hold
- MP3 file metadata
- Increase in SVEN output level
- Recorder now activates when in the Setup Menu
-
Fixed
- some SD Cards where not being recoginized on power up
- numerous Return A/B metering problems
- returns A/B gain when tone is active
- slate and tone bug, where the inputs where not muted when the tone plays
- digital output interruption when record is pressed
- the slate and tone ouput on the 3.5mm jack with All Call when Talk back mode is enabled
- 2 GB SD card formatting
- several SVEN issues with loss of voice
- the tone staying on the meters when the returns are activated
- the input limiter indication when inputs are linked
v1.1
Released: January 01, 2010
Initial release