702

v2.67

Released: November 09, 2011

Download v2.67

Fixed

• Low level File system improvements.
• DC offset removed when HPF is enabled for high sample rate recordings.

Known issues

• If a single storage medium (i.e. CompactFlash card) is selected/available for recording and it is unintentionally removed the unit will briefly show that the volume has been taken off-line, but the display will still indicate recording and the record LED will remain illuminated for up to 30 seconds or until STOP is pressed.
• When initiating a repair on an unformatted volume (not likely…but), the unit will begin the process and lock up, requiring a hard shut down.
• FireWire storage volumes with a PL3507 FireWire chipset and hard drive fail the speed test. Threre is a problem reading from these external drives. There are no problems writing to drives of this type.
• These known issues will be addressed in future revisions of firmware.
• Cue Markers are deleted if file is automatically split.

v2.66

Released: July 28, 2010

Fixed

• Bug in which the recorder's drive(s) would not properly mount when connected via FireWire to Mac OS X 10.6 (Snow Leopard).

v2.65

Released: November 16, 2009

New

• Firmware revision number shows in boot up splash screen.
• Ability to mark a take as 'NG' (No Good). Typically used to identify a take as not the one to be used in post, although there may be sections of it which may be useful. Data stored in the iXML chunk.
• STOP+LAMP shortcut for quick access to Circling or NG'ing the last recorded take.
• Add ability to change take status of any take from the take list.
• Addition of iXML (v1.52) parameters including <FALSE_START>, <NO_GOOD>

Changed

• When daily folders are selected, the daily folder is only created when record is first pressed. This prevents empty daily folders being generated if the 7-series is powered up every day but without recording anything. This also applies to the generation of top level and bottom level folders.
• Drive "Erase" menus renamed to "Erase / Format".

Fixed

• RF hash/noise no longer causes the recorder to incorrectly stop recording in ExtTC/cont - Auto Record mode. It will only stop when stationary TC code is detected.

v2.63

Released: April 16, 2009

New

• LCD scrolling direction menu enables user to select which direction the rotary encoder scrolls through the menu

Changed

• Enhanced write algorithm to significantly improve real-time multi-track recording to DVD-RAM even while simultaneously recording to 2 media

Fixed

• Drive warning corrupt file bug

v2.61

Released: March 16, 2009

New

• Periodic, automatic file header saving during recording to preserve WAV file integrity in the event power is lost during recording. Does not apply to FLAC or MP3 recording.
• Menu option to allow display of gain settings instead of sample rate/gain in the LCD.
• Latching tone - press and hold tone button >2 secs to latch on.
• Option to enable tone activation during record. Set in the Tone: Record Lock menu.
• Menu to prevent start up messages appearing at power up.
• Default 'tape' metadata if mid-level (daily) folder is set to none (important for EDL based workflows).

Changed

• 10 Hz steps in the tone generator frequency.
• Scrolling through menu made more intuitive.
• Remove drive repair function and associated menus.

Fixed

• Condition where keyboard combinations pressed with a connected keyboard (via the CL-1) could freeze the recorder.
• Condition where Windows Media Players-generated WAV files would not be recognized or playable on the recorder.

v2.54

Released: January 01, 2009

New

• Added beeps to Rec-Pause Mode, so beeps occur when recording is paused and un-paused.

Fixed

• SPEED and TAKE tags were sometimes not written the BEXT chunk when the recorder was in EXT_TC AUTO or EXT_TC/CONT AUTO. This bug did not affect the iXML tags - they are always correct
• The REC: Timer Start/Stop function did not function if the recorder was set to record to daily folders and the record start time was after midnight.

v2.48

Released: June 24, 2008

New

• Record-pause, allows for recording to stop, then commence without generating a new file.
• Family UID added to iXML metadata

Changed

• "Record pending” notification when a record command has been given and the DSP is not available to begin recording. The recorder now enters stand-by mode and will begin recording immediately once the DSP is available to record. This improves the overall performance and reliability of the CL-1 in particular. “Record Pending” also replaces the “Busy” notification.
• CompactFlash formatting now adds a partition so that CF cards can be exchanged between all 7-Series Recorders including the 788T.
• Poly files no longer contain unused tracks. The 7-Series will no longer record zeros to unused tracks.
• Circled takes are now tagged <CIRCLE>= TRUE in the iXML chunk and @ is added to the BEXT filename.

Fixed

• MP3 time code stamp bug - time code was not getting stamped correctly in the ID3 tag

v2.40

Released: December 07, 2007

Changed

• Estimate of available drive space when recording FLAC format. Original estimates too optimistic.

Fixed

• MP2 and MP3 file length calculation.
• Possibility of missed take introduced in 2.34 with CF after rapidly entering record after pressing stop. Unit now says, "Please Wait".
• Project folder not setting and clearing copy flags in sub-folders. Bug introduced in 2.34.
• Metadata note data saving. When notes were added and then edited, the edits occasionally did not take affect. Bug introduced in 2.34.
• Ehen recording FLAC to CF, the recorder had the possibility of producing a file of length 0 seconds.
• When changing from FLAC format to MP2, the unit had the possibility of locking up.
• Lockout of transport controls now operating properly.
• Gain display only shows when gain knobs are turned.

v2.34

Released: September 25, 2007

New

• 47952 and 47952F sampling rates. 47952F mode records at 47952 and stamps files at 48 kHz.
• MP3-file format recording at numerous data rates
• MP2 file format recording at numerous data rates
• FLAC file format recording and playback
• Input gain to infinite attenuation option (Setup Menu selected)

Changed

• Media speed test improved. Speed testing for all available drives combined into one menu option. All active drives are tested at different sampling rates and routings.
• Multiple linked units now record with sample-accurate start and stop times, making file management easier in post production

Fixed

• Long CF shutdown time
• AES3-id digital output one sample offset between left to right.
• AES3-id bit stream is incorrectly formatted in consumer mode high-pass filter clipping gain accuracy improved, better match between actual gain and displayed gain files can played back when selected from the Setup Menu (bug introduced in 2.15)

v2.15

Released: May 30, 2007

New

• Ability to delete unrecognized file types

Changed

• Error codes more descriptive
• Dash and underscore take separators back in

Fixed

• WAV file headers now end in even byte words for proper importation into ProTools and Avid
• Reformatting drive does not delete dynamic lists (scene names, folder)

v2.10

Released: March 05, 2007

Changed

• Full screen error warnings during recording. Note: media will flash in drive info location if off-line
• Removed system indications and stack warning indications

Fixed

• Intermittent lockup when daily folders are set and new day is generated on power-up
• Lockup with external DVD-RAM drives in vertical position going off-line; recorder now drops a failed external drive if media goes off line
• Lockup using the CL-1 when Ctrl-H and Ctrl-C are pressed in a specific setup
• Lockup when no CF is inserted but unit is hooked to PC
• Lockup when v2.09 changes between FireWire drive and FireWire host mode
• Take numbers now increment correctly when false takes are generated an invalid path error during file copying

v2.09

Released: January 14, 2007

New

• Low-cut and phantom control can now be linked. When you
• choose link mode, Ch2 is forced to Ch1 making them linked. Front panel
• Ch1 shortcut toggles Ch1 and forces Ch2 to Ch1. All other operations
• work the same. Note that low-cut and phantom are not permanently linked i.e. once channels are linked, low-cut and phantom can be individually set for each channel.
• Folder options menu with folders/subfolders for project, daily, scene, and name-your-own folder .
• Now prompted to generate new daily folder (for users who are on a set over midnight). Before creating a new daily folder, the unit checks to see if one exists for the previous day. If so, it prompts the user to see if they want to create a new one.

Changed

• The SOUNDDEV folder is now hidden from the File Viewer. It still appears when connected to a computer.
• “Firewire Connection” menu option has been moved up the list. It is now menu item #2.
• DVD-RAM speed improvements. Improved reliability with 3X media over the 5X requirement of previous revisions.

Fixed

• Scene name menu bug fix.
• Sample rate stamping; the SR was stamped incorrectly if <REC> was pressed after playing back a file recorded at a different sample rate. This bug existed for all previous versions of firmware.
• Frame rate update on main screen after playing 48048F file.

v2.10

Released: October 09, 2006

New

• "Copy from EXHDD to CF" option in file copy menu
• Support for PL3507, GL711, FW912 FireWire chipsets (including MaPower enclosures and the Sandisk Extreme 1394 CF adapter)
• In File Viewer, added Frame Rate information upon pressing the rotary switch
• In take list screen, pressing rotary switch shows heading names

Changed

• 7-Series can now see another 722 or 744T HDD via -1394 and use it as an EXHDD
• Daily Folder syntax now 06Y10M06 instead of Y06M10D06 to eliminate truncation on DV40, DV824
• Characters for editing notes, scene names, etc now wraparound
• back to the beginning instead of stopping at "Z" when rotary switch is turned or the up/down arrows are used

Fixed

• Take reset upon power-off bug
• CL-1 keyboard lockup problem when another shortcut was pressed while still in an open menu
• Cursor moved to the end of string editing for scene name, notes, track name
• "Renaming folder" bug where "please wait…" would stay on screen too long
• Problem with Notes not always appearing on EXHDD
• Problem introduced in v2.00 where files in root directory
• wouldn't play if daily or scene folder was enabled
• Problem introduced in v2.00 where last file recorded wouldn't
• always play automatically when play was pressed.

v2.00

Released: September 25, 2006

New

• Real-time recording to external hard drive or DVD-RAM drives over FireWire
• Post-record copying to external hard drive or DVD-RAM drives over FireWire
• Keyboard support (using the CL-1)
• Switch closures control transport controls (using the CL-1)
• File metadata in iXML (1.4) format
• Post-record renaming of file names
• Post-record renaming of folder names
• Saving/recall of track names
• Saving/recall of scene names

Changed

• FireWire transfer speed increase to 50 Mb/s

Fixed

• Occasional “phasey" headphone monitoring signal

v1.74

Released: April 23, 2006

New

• Rec / stop beep indication
• File / folder delete
• False take function via STOP-REW and STOP-FF
• Low battery beep
• Take list / circle take via STOP-PLAY

Changed

• ".." now shows "Go to parent folder."
• Default take # is now "01" instead of "1".
• "_" has been removed as a take separator to alleviate mono-confusion.
• Menu: "Single Folder" option change to "No Folder"
• New menu item "File: View Take List"

v1.68

Released: March 28, 2006

New

• The SOUNDDEV folder has been put back to store user setup files, new firmware, and the INFO.TXT file

v1.67

Released: March 24, 2006

Initial release